# Flowroute SIP Trunk

[Flowroute](https://flowroute.com/) is one of the world’s first software-centric carriers and enables users to enhance and create new services without complexity. With their HyperNetwork™ they are able to mesh multiple networks into a single telecom network providing their customers with superior reliability, reach, and simplicity.

PortSIP PBX natively integrates with Flowroute SIP trunking to support voice calling and SMS/MMS messaging. Within the PortSIP PBX configuration, users can select Flowroute as their service provider to fully utilize both calling and messaging services.

To successfully integrate Flowroute with PortSIP PBX, you must complete the following high-level steps:

1. **Obtain a Flowroute Account**\
   Create an account with Flowroute to gain access to SIP trunking and messaging services.
2. **Log In and Configure Flowroute Settings**\
   After account creation, sign in to your Flowroute portal and complete the required configurations for voice and SMS/MMS services.
3. **Configure Integration in PortSIP PBX**\
   Set up the Flowroute SIP trunk and messaging integration in the PortSIP PBX Web Portal.

***

### Topics Covered in This Article

* [Purchase a DID on the Flowroute Platform](/portsip-communications-solution/configuring-sip-trunks/flowroute-sip-trunk/purchase-a-did-on-flowroute-platform.md)
* [Configuring Flowroute IP Authentication Trunk](/portsip-communications-solution/configuring-sip-trunks/flowroute-sip-trunk/configuring-flowroute-ip-authentication-trunk.md)
* [Configuring Outbound & Inbound Calls](/portsip-communications-solution/configuring-sip-trunks/flowroute-sip-trunk/configuring-outbound-and-inbound-calls.md)
* [Flowroute SMS Integration](/portsip-communications-solution/configuring-sip-trunks/flowroute-sip-trunk/flowroute-sms-integration.md)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://support.portsip.com/portsip-communications-solution/configuring-sip-trunks/flowroute-sip-trunk.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.