Configuring Outbound & Inbound Calls
Last updated
Last updated
You need to sign in to the PortSIP PBX web portal to create the outbound and inbound rules for making & receiving calls.
You can sign in to the PortSIP PBX Web portal using one of the following methods:
Sign in as the PBX system administrator, navigate to the Tenants menu, choose a tenant, and click the Manage button to switch to that tenant.
Sign in as a tenant admin to manage the tenant.
For more details please reference Tenant Management.
In order to place outbound calls you need to configure Outbound Rules. Go to Call Manager > Outbound Rules in the left hand side menu and click the Add button:
Give your Outbound Rule a name
Set up at least one condition for this outbound rule in the section Apply this rule to the following calls.
Scroll to the Place outbound calls using the following trunk routes section, click the Add icon, then select Telnyx Trunk and save the Outbound Rule.
Depending on your users’ dialing habits, you may want to strip some of the leading digits or prepend the country code. For example, the below configuration can be used to prepend all dialed numbers with the leading 1 in case your users are accustomed to US domestic numbers in the national format.
In order to receive inbound calls you need to configure Inbound Rules. Go to Call Manager > Outbound Rules in the left hand side menu and click the Add button:
Give your Inbound Rule a name
Click the Choose a Trunk button to select the trunk
Enter the number for DID/DDI Number or Number Range field, the entered number must be in the DID pool range of the selected trunk
Set the extension to route calls to, int the case is 1001
Click OK to save the rule. Depending on your business needs, you may set specific office hours for the rule and route calls to different extensions, and voice mailbox or automatically drop the call based on the schedule. Please reference the article Office Hours and Holiday Schedule for more details.
For more details about the outbound and inbound rules configuration, please refer to the article Call Route Management.
