Configure an SBC for Multiple Tenants
Last updated
Last updated
PortSIP SBC supports configuring one Session Border Controller (SBC) to serve multiple tenants for Teams Direct Routing.
Microsoft provided a detailed guide for configuring Microsoft Teams Direct Routing for multiple tenants; please follow Configure a Session Border Controller for multiple tenants to set up the tenant domains in the Microsoft 365 admin center.
According for that guide, the following items summarize the configuration of the base domain and subdomains:
The Teams Direct Routing Base domain is customers.adatum.biz.
The tenant domains are sbc1.customers.adatum.biz, sbc2.customers.adatum.biz, and sbc3.customers.adatum.biz.
a wildcard SSL certificate for the domain *.customers.adatum.biz.
Resolve the domain customers.adatum.biz to the SBC IP address.
Please follow the guides below to install and configure the PortSIP PBX:
Now, create three tenants and set their respective SIP domains to sbc1.customers.adatum.biz, sbc2.customers.adatum.biz, and sbc3.customers.adatum.biz.
Please install the PortSIP SBC by following the guide Installation of the PortSIP SBC.
To configure the PortSIP SBC for multiple tenants, please follow the guide and pay attention to the following points:
When adding the TLS certificate, enter customers.adatum.biz as the TLS domain and select the option This is an SBC Web Domain Certificate. Then, copy and paste the wildcard certificate of the domain *.customers.adatum.biz to add the TLS certificate.
When adding the Teams Base Domain, enter customers.adatum.biz as the Teams Base Domain.
From the menu, select Settings > Network and enter customers.adatum.biz in the Web Domain field.
Please follow the guide Configuring SBC and PBX to create the Teams trunk and inbound and outbound rules for routing calls. Please skip the section 1 Add Teams Base Domain since we have already completed that step in the previous steps.
